Concraft XS in a light living room

Concraft XS

Seamless from 3 mm thick.

A seamless floor or wall from 3 mm, on almost any existing substrate. Without demolition or raising the level.

★ 5.0 on GoogleSince 2009Showroom in Barendrecht

Resin floors, microcement, lava stone: those are finish layers. Concraft XS is a seamless floor system, tuned to your situation and made to last for years. That is why we always start with a substrate analysis and base our plan on it, always in consultation with you.

Concraft XS is a seamless finish that we can apply to almost any existing subfloor, in almost any building. On floors, walls, ceilings and furniture, in the bathroom and the kitchen too.

Concraft XS is a cement-based finish, commonly known as microcement, lava stone or poured floor. What makes it different is what happens underneath: we start with the substrate and finish with our own system. Scratch-resistant, stain-resistant and in any colour that suits the interior, from warm sand tones to deep anthracite.

Curious what this could do for your space?

In a consultation we look at your space and your floor, so you quickly know where you stand. In our showroom in Barendrecht or by phone.

Layer thickness

Concraft XS is from 3 mm thick. It fits on almost any existing floor without demolition or raising the level, and lines up neatly with doors and thresholds.

Have 5 cm or more? See Concraft XL.
from 3 mm
On sand-cement or anhydrite screed, on concrete and on many other substrates. We always check what lies underneath first.

Before you book

What you want to know.

Can it crack?

The material does not crack by itself. A seamless floor does follow what happens beneath it. That is why we measure moisture first and look at the whole floor build-up.

How much maintenance does it need?

Little. Vacuum or sweep, and wipe with a pH-neutral cleaner now and then.

What does it cost?

That depends on the surface area, the condition of your substrate and the finish. After a phone call or consultation you know where you stand.

Book a consultation

Three finishes

Concraft XS Cloudy
View larger

Cloudy

In the final step we give the floor its cloud pattern by hand and machine: lively and natural, every floor different.

Concraft XS Soft
View larger

Soft

The same soft clouds as Cloudy, but calmer and more even. Understated, with just enough pattern and texture.

Concraft XS Stone
View larger

Stone

Natural stones in the top layer. You choose the base colour and the colour and size of the stones, from subtle to pronounced.

Stone can be combined endlessly. We make samples together until it is right.

Six of countless combinations

  • Concraft XS Stone, colour variant 1
  • Concraft XS Stone, colour variant 2
  • Concraft XS Stone, colour variant 3
  • Concraft XS Stone, colour variant 4
  • Concraft XS Stone, colour variant 5
  • Concraft XS Stone, colour variant 6

More than floors

Also for bathrooms, walls and furniture.

The same finish also goes on the wall, in the shower, on the stairs and on furniture. All in one piece, without grout or sealant joints.

Bathroom with vanity unit and freestanding bath
Seamless wall and TV unit with fireplace
Built-in bench in a dining room

What clients say

“Mooi product. Vakmensen.”
Client · Google

5,0 on Google

Read all reviews on Google →

Strong

Highly resistant to scratches and stains.

Watertight

Suitable for bathrooms, without sealant joints or grout.

Everywhere

Floor, wall, stairs and furniture in one continuous finish.

Frequently asked questions

Can it crack?

The material does not crack by itself. A seamless floor does follow what happens underneath: if the substrate moves, you will see it in the finish. That is why we start with the substrate. We measure the moisture, look at the complete floor build-up and stabilise cracks in the screed before we finish. That way you prevent surprises instead of repairing them later.

How much maintenance does it need?

Very little. Vacuum or sweep, and now and then wipe with a damp cloth and a pH-neutral cleaner. At handover you receive maintenance advice tailored to your floor, so it stays beautiful for years.

What is the difference with other seamless floors?

Concraft XS is a cement-based finish, commonly known as microcement, lava stone or poured floor. The difference is in the approach: we start with the substrate, look at the complete floor build-up and work exclusively with the best materials, for both the substrate preparation and the finishing layers. That way your floor or wall stays beautiful for years.

What does a Concraft XS floor cost?

The price depends on many factors: the surface area, the condition of your substrate, the build-up beneath it and the finish you choose. Because every floor is different and we have no standard approach, a fixed price per square metre is often hard to give. We understand that you want a rough idea before visiting the showroom. So book a phone call first: together we estimate the work and give you an indication of the cost.

How thick is Concraft XS?

Concraft XS is from 3 mm thick, so it fits on almost any existing floor without demolition or raising the level.

Can Concraft XS be used in bathrooms?

Yes. Every layer in the system is waterproof. We first plaster bathroom walls with cement plaster, which is not sensitive to moisture. Then, depending on the finish you choose, we apply 5 or 6 waterproof layers, in the shower too. The result: a bathroom without grout or sealant joints.

Can Concraft XS be used with underfloor heating?

Yes, very well. We apply Concraft XS on a screed that already contains the underfloor heating, sand-cement or anhydrite. Because the finish is only a few millimetres thick, heat passes through quickly and evenly and the floor responds fast when you turn the heating up or down. What matters is what lies underneath: the screed must be dry enough and brought up to temperature gently with a heating protocol first. We check this beforehand, so you do not get cracks later.

What is the difference with Concraft XL?

Concraft XL is a real concrete floor of at least 5 cm, poured by us or made from an existing concrete floor. Concraft XS is a thin finish on an existing substrate, also for walls and furniture.

Still unsure? In a consultation you get answers for your own space.

Book a consultation

Showroom Barendrecht

A floor is something you feel.

Feel the finishes and see how the light falls on a floor. In our showroom in Barendrecht we talk through your space and your wishes, and take all the time you need.

Een serene eetkamer met natuurlijke houttinten, waarin een schone naadloze vloer en wanden de perfecte backdrop vormen voor scandinavisch design met hangende lampjes en opgeruimd meubilair.